All functions in one compact hoist.
The XSClimber is our electric-powered self-reeving traction hoist, designed and developed by our own expert engineers. This next-generation traction hoist was built for maximum safety. With an integrated overload mechanism, the hoist is ready for use right out of the box, because it does not have to be calibrated first.
EASY INSPECTION & MAINTENANCE
We fitted the XSClimber with a four-point access system, for easy access to its internal mechanisms – by removing just 4 bolts.
Inside, protected by IP54 dust and waterproof housing, a single, easy-to-replace Printed Circuit Board (PCB) contains all the
electronic components, for rapid inspection or replacement. To further quicken maintenance, the XSClimber is fitted with a window to check the oil level from the outside and the control panel has a digital running hours counter, so you’ll know when it’s due for service.
The suspension point of the XSClimber has an integrated overload detector, which is pre-calibrated. This makes it impossible to use the hoist if the load is too heavy. The XSClimber can be equipped with all types of secondary brakes, to prevent the platform from tilting or falling in case of wire rope failure.
BUILT TO LAST
The XSClimber meets or exceeds OSHA and ANSI requirements for heavy duty hoists, and is certified in accordance with EN1808:1999+A1:2010. Its Working Load Limit (WLL) was set at 1100 lbs. A long lifespan is ensured by the use of high-grade materials, and by waterproof housing and ventilation slots.
PLUG AND PLAY
A single electronic connector is all that is needed to connect the XSClimber to the Central Control Box (CCB) of the platform. Because every XSClimber is equipped with its own control panel, the wire rope can be inserted by a single person, which makes the installation quick and easy.